Radar/TV Mounts

Seaview

Seaview 12" Aft Leaning Camera Mount [PMA-12-FMT-7]

12" Aft Leaning Camera MountGet the most out of your camera by using a Seaview Camera Mount. This Camera Mount is 12.5" tall and is aft leaning. The four pre-drilled 7″ × 7″ base plate makes it very simple and easy to install.Cable...

Seaview

Seaview 5" Thermal Camera Mount f/FLIR M100 M200 - 8" Round Base [PM5-FMH-8]

5" Thermal Camera Mount f/FLIR M100 & M200 - 8" Round BaseGet the most out of your FLIR M100 or M200 camera with the Seaview PM5-FMH-8 camera mount. This mount will raise your camera 5.5" clearing anything that will obstruct your cameras view. The...

Seaview

Seaview Top Plate f/FLIR M100 M200 [ADA-F2]

Top Plate for FLIR M100 & M200This Seaview top plate is for FLIR M100 or M200 thermal cameras. This one piece design gives the top plate a nice clean look, and is made from King Starboard. Specifications:Type: AdaptersBox Dimensions: 5"H x...

Seaview

Seaview Mast Mount f/KVH TV1 [SM-15-A]

Mast Mount f/KVH TV1Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast. AdjustableDesigned with fore and aft...

Scanstrut

Scanstrut CAM-PT-300-02 Aluminum PowerTower f/Cameras - 12" [CAM-PT-300-02]

CAM-PT-300-02 Aluminum PowerTower® for Cameras - 12"The ingenious Camera Power Mount solves the problem of finding a level mounting surface to install cameras onto your powerboat, commercial vessel, RIB or sailboat wheelhouse.Compatible with:FLIR -...

Scanstrut

Scanstrut CAM-PT-150-02 Aluminum PowerTower f/Cameras - 6" [CAM-PT-150-02]

CAM-PT-150-02 Aluminum PowerTower® for Cameras - 6"The ingenious Camera Power Mount solves the problem of finding a level mounting surface to install cameras onto your powerboat, commercial vessel, RIB or sailboat wheelhouse.Compatible with:FLIR -...

Edson Marine

Edson 4 Wedge for Under Vision Mounting Plate [68810]

4° Wedge for Under Vision Mounting PlateWhile underway the bow of your powerboat tends to ride at an elevated angle, causing your radar to be angled. With Edson's 68810 4 degree Wedge for under Vision Mounting Plates the elevated bow will be offset...

Seaview

Seaview 4 Wedge f/10x10 Base [PM-W4-10]

4° Wedge for 10x10 BaseThis Seaview Base Wedge angles your radar down 4 degrees allowing your radar to be level when the boats bow is up. Will fit all Seaview mounts with a 10″×10″ base plate.Features:Pre-drilled mounting holes...

Seaview

Seaview Mast Platform f/KVH M7/TV6 Intellian i6/D6 [SM-24-A]

Mast Platform for KVH M7/TV6 & Intellian i6/D6Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast.AdjustableDesigned...

Seaview

Seaview Mast Mount f/FLIR Thermal Camera Raymarine M-Series [SM-14-F]

Mast Mount for FLIR Thermal Camera & Raymarine M-SeriesAchieve an unobstructed view for your FLIR or Raymarine thermal camera by mounting it on your mast. Made from marine grade aluminum. We now Chem-Film (same process used by Boeing) each high...

Scanstrut

Scanstrut WD-RAD-01 Top Plate f/PowerTower Radar Mounts - 4 [WD-RAD-01]

WD-RAD-01 Top Plate f/PowerTower® Radar Mounts - 4°Enhance the performance of your radome with the rugged, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat...

Scanstrut

Scanstrut WD-OPNARY-01 Top Plate f/PowerTower Open Array Mounts - 4 [WD-OPNARY-01]

WD-OPNARY-01 Top Plate for PowerTower® Open Array Mounts - 4°Enhance the performance of your radome with our tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when...